DIN EN ISO 2811-1-2002 涂料和清漆.密度测定.第1部分:比重瓶法
作者:标准资料网 时间:2024-05-15 09:48:00 浏览:8063
来源:标准资料网
【英文标准名称】:Paintsandvarnishes-Determinationofdensity-Part1:Pyknometermethod(ISO2811-1:1997);GermanversionENISO2811-1:2001
【原文标准名称】:涂料和清漆.密度测定.第1部分:比重瓶法
【标准号】:DINENISO2811-1-2002
【标准状态】:作废
【国别】:德国
【发布日期】:2002-02
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:清漆;运动粘度;天平;密度测量;规范(验收);密度瓶;比重瓶测量分析法;试样制备;校准实施;密度测定法;密度测定瓶;覆层材料;抽样方法;测量、检验和仪器;试验;定义;密度;涂料;物理性能测量;液体;公差(测量);粘度;测定;测
【英文主题词】:
【摘要】:
【中国标准分类号】:G51
【国际标准分类号】:87_040
【页数】:11P;A4
【正文语种】:德语
基本信息
| 标准名称： | 城镇供水厂运行、维护及安全技术规程 |
| 英文名称： | Technical specification for operation maintenance and safety of city and town waterworks |
| 中标分类： |
工程建设 >>
给水、排水工程 >>
室外给水、排水工程 |
| 替代情况： | 被CJJ 58-2009代替 |
| 发布部门： | 中华人民共和国建设部 |
| 发布日期： | 1994-07-07 |
| 实施日期： | 1994-12-01 |
| 首发日期： | 1900-01-01 |
| 作废日期： | 2010-08-01 |
| 起草单位： | 北京市自来水公司 |
| 起草人： | 周景印、宁瑞珠、赵新民、张忠祯等 |
| 出版社： | 中国建筑工业出版社 |
| 出版日期： | 1994-12-01 |
| 页数： | 69页 |
适用范围
为使城镇供水厂建立标准化的运营机制，提高供水管理的技术水平，确保安全、稳定优质、低耗供水，制定本规程。本规程适用于常规水处理的城镇供水厂。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 工程建设 给水 排水工程 室外给水 排水工程
Product Code:SAE J1939/71
Title:Vehicle Application Layer
Issuing Committee:Truck Bus Control And Communications Network Committee
Scope:This document has also changed to comply with the SAE Technical Standards Board format. Definitions have changed to Section 3 and Abbreviations to Section 4. All other section numbers have changed accordingly. This series of SAE Recommended Practices has been developed by the SAE Truck and Bus Control and Communications Network Subcommittee of the SAE Truck and Bus Electrical and Electronics Committee. The objectives of the subcommittee are to develop information reports, recommended practices, and standards concerned with the requirements design and usage of devices which transmit electronic signals and control information among vehicle components. The usage of these documents is not limited to truck and bus applications; other applications may be accommodated with immediate support being provided for construction and agricultural equipment, and stationary power systems. These documents are intended as a guide toward standard practice and are subject to change as to keep pace with experience and technical advances.New parameters and parameter groups are reviewed and discussed by the Subcommittee on a regular basis. This document reflects all changes and additions approved and balloted through December 2001.
